|
 |
|
|
|
|
|
| |
| |
|
|
|
Masterflex EASY-LOAD® II PUMP HEADS
L/S & P/S Heads, 955-0000/0005/0025, 956-0000/0005/0025, 957-0000, 958-0000, 959-0000/0025
|
|
|
|
|
|
|
|
| |
|
| |
SPECIFICATIONS :
Pump Head number |
Pump Material |
Occlusion |
Shaft Length |
|
955-0000 |
PPS/SS |
Fixed |
Short |
13, 14, 16, 25, 17, 18 |
955-0005 |
PPS/SS |
Fixed |
Long |
13, 14, 16, 25, 17, 18 |
955-0025 |
PPS/CRS |
Fixed |
Short |
13, 14, 16, 25, 17, 18 |
956-0000 |
PPS/SS |
Fixed |
Short |
15, 24, 35, 36 |
956-0005 |
PPS/SS |
Fixed |
Long |
15, 24, 35, 36 |
956-0025 |
PPS/CRS |
Fixed |
Short |
15, 24, 35, 36 |
957-0000 |
PPS/SS |
Adjustable |
Short |
13, 14, 16, 25, 17, 18 |
958-0000 |
PPS/SS |
Adjustable |
Short |
15, 24, 35, 36 |
959-0000 |
PPS/SS |
Fixed |
Short |
13, 14, 16, 25 |
959-0025 |
PPS/CRS |
Fixed |
Short |
13, 14, 16, 25 |
Typical Flow, Pressure and Vacuum Data:
Tubing |
Flow rate |
Discharge Pressure* |
Vacuum*
@ 600 rpm
in (mm) Hg |
Suction Lift*
@ 600 rpm
ft (m) H20 |
@ 1 rpm
mL/min |
@ 600 rpm
mL/min |
Continuous
psig (bar) |
Intermittent
psig (bar) |
13 |
0.06 |
36 |
25 (1.7) |
40 (2.7) |
26 (660) |
29 (8.8) |
14 |
0.22 |
130 |
25 (1.7) |
40 (2.7) |
26 (660) |
29 (8.8) |
16 |
0.80 |
480 |
25 (1.7) |
40 (2.7) |
26 (660) |
29 (8.8) |
25 |
1.7 |
1000 |
20 (1.4) |
35 (2.4) |
26 (660) |
29 (8.8) |
17 |
2.8 |
1700 |
15 (1.0) |
20 (1.4) |
20 (510) |
22 (6.7) |
18 |
3.8 |
2300 |
10 (0.7) |
15 (1.0) |
20 (510) |
22 (6.7) |
15 |
1.7 |
1000 |
25 (1.7) |
40 (2.7) |
26 (660) |
29 (8.8) |
24 |
2.8 |
1700 |
25 (1.7) |
40 (2.7) |
26 (660) |
29 (8.8) |
35 |
3.8 |
2300 |
20 (1.4) |
35 (2.4) |
26 (660) |
29 (8.8) |
36 |
v |
2900 |
15 (1.0) |
20 (1.4) |
24 (610) |
27 (8.3) |
Number of rollers: |
4 |
Maximum pump speed (rpm): |
600 |
Nominal torque load—Running: |
up to 90 oz-in (6.5 kg•cm) |
Housing materials: |
Polyphenylene sulfide (PPS) acetal, nylon |
Roller materials: |
Cold Rolled Steel (CRS)/Stainless Steel (SS) |
Bearing materials: |
Cold Rolled Steel (CRS)/Sealed Stainless Steel |
Rotor materials: |
Cold Rolled Steel (CRS)/Stainless Steel (SS) |
Operating Temperature‡: |
32°F to 104°F (0°C to 40°C) |
Storage Temperature: |
–49°F to 149°F (–45°C to 65°C) |
Humidity: |
0% to 90% (non-condensing) |
Dimensions (W × H × D): |
Operating: |
4 in × 4-3/4 in × 2-3/4 in (102 mm × 121 mm × 70 mm) |
Open: |
4 in × 5-1/2 in × 2-3/4 in (102 mm × 140 mm × 70 mm) |
Weight: |
1.4 lb (0.6 kg) |
* As tested with NORPRENE®, PHARMED® BPT, and TYGON® tubing.
Values will be less with silicone and C-FLEX®.
‡ Use in this temperature range for continuous duty operation with no decrease in performance or product life.
Pump Heads will work outside this range with some possible reductions in performance or product life.
|
| |
|
|
|
OTHER PRODUCTS: |
ARO Pumps, pH Neutralization Systems, Blue-White Pumps, Blue-White Meters, Chemtainer Tanks, Diesel Fuel Systems, Ebara Pumps, Flowline Level Sensors, Flowline Level Controls, Flux Pumps, Gri Pumps, Grundfos Pumps, Hayward Valves, Hayward Controls, Lmi Pumps, Lutz Pumps, Myers pumps, Masterflex Pumps, March Pumps, Micropump, Plast-O-Matic valves, Pulsatron Pumps, RODI Systems, Price Pumps, Rainwater reclamation Systems, GF Signet, Signet Sensors, Wilden pumps, Yamada Pumps, Colder Fittings, More Products |
|
|
|
|
| |
|
|
© Burt Process Equipment |
All Right Reserved, Designed & Developed by
|
|
|
|
|
|
|
 |
|
About price pumps
Magnetically Driven Centrifugal Pump
Flows to 65 GPM / Heads to 165 feet.
Magnetically Driven Centrifugal Pump, HP MAG-DRIVE, 2MS75 MAG-DRIVE, CD MAG-DRIVE, CL150 MAG-DRIVE, XL/XT MAG-DRIVE
Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics
O.E.M.-Washers, filters, chillers, cooling towers, scrubbers, plating equipment
Agriculture-Acid fertilizers and other agricultural chemicals Standard Bushings-Carbon Graphite
Optional Bushings-Alpha Silicon Carbide (Tungsten carbide coated shaft reguired) Magnetic Drive Horizontal Centrifugal Pumps Viton (STD) Teflon, Buna, EPR, Neoprene, Kalrez, Flouro-Silicon
Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics O.E.M.-Washers, filters, chillers, cooling towers, scrubbers, plating equipment Agriculture-Acid fertilizers and other agricultural chemicals
CD MAG-DRIVE Price Pump Models - CD100MD & CD150MD Magnetic Drive Horizontal Centrifugal Pumps
Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics O.E.M.-Washers, filters, chillers, cooling towers, scrubbers, plating equipment
Standard Bushings-Carbon Graphite Optional Bushings-Alpha Silicon Carbide (Tungsten carbide coated shaft reguired)
Optional Tungsten carbide coated shaft
Features
HP MAG-DRIVE, 2MS75 MAG-DRIVE, CD MAG-DRIVE, CL150 MAG-DRIVE, XL/XT MAG-DRIVE
About Training
Trainings and Seminars by Burt Process Equipment, Backed by 30+ years of experience and subject matter experts in the industry, Burt Process Equipment provides hands on trainings, seminars and tools required for your success. about Trainings and Seminars provided by Burt Process Equipment.
Visit Related Products:
How to use -
to call or email BPE CONTACT INFORMATION
EMAIL US : customerservice@burtprocess.com
MID ATLANTIC Burt Process Equipment, Inc. Phone: (717) 792-6950 Fax: (717) 792-6953
For more information from other partners - click on the burprocess home icon at the top left column. There you will find all the links of our partner's site.
