Industrial Process- P/S NEMA 4X Digital Process, P/S Process Digital Pump:

NEMA 4X Process Digital Pump Systems :
Product Benefits
• Wide range flow rate: 0.006 to 3400 mL/min (0.0001 to 54 GPH) with P/S tubing. Flow rate depends on drive rpm and tubing size.
• Graphical LCD display shows six different parameters: motor rpm, flow rate, feed volume, cumulative volume, feed interval time, and copy number.
• Brushless, maintenance-free motor with improved 0.1% speed control accuracy between cycles for convenient, automated dispensing.
• Feed by: volume—in milliliters (0.001 to 99,999), liters, and gallons; copy—1 to 99,999 feed cycles. Set time interval (SEC) between feed cycles from 1 to 99,999 seconds.
• Remote control capabilities via fluid-resistant input/output connector on

Back of drive:
- Speed control input: scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V
- Pumping direction
- Start/stop/purge
- Tachometer output: scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, or open collector
• Impervious to acids, caustics, oxidizers and organic solvents.
• 6000 to 1 turndown.

Process Digital Pump Systems:
Product Benefits
• IP66 and NEMA 4X rated. Sealed 316 stainless steel housing and sealed keypad are protected from dust, water, and chemicals in the wash down environment—simply hose down to clean.
• Flow rate: 0.006 to 3400 mL/min (0.0001 to 54 GPH) with P/S tubing. Flow rate depends on drive rpm and tubing size.
• Graphical LCD display shows six different parameters: motor rpm, flow rate, dispense volume, cumulative volume, dispense interval time, and copy number.
• Brushless, maintenance-free motor with improved 0.1% speed control accuracy between cycles for convenient, automated dispensing.
• Dispense by: volume—in milliliters (0.001 to 99,999), liters, and gallons; copy—1 to 99,999 dispense cycles. Set time interval (SEC) between dispense cycles from 1 to 99,999 seconds.
• Remote control capabilities via fluidresistant input/output connector on back of drive:
- Speed control input: scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V;
- Pumping direction: requires open collector or contact closure;
- Start/stop/purge: requires open collector or contact closure;
- Tachometer output: scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, or open collector.

Ordering Information:

Pump & Drive Catalog #	Drive Catalog #	Drive Ref #	Pump Head Catalog #	Pump Head Ref #	RPM	Tubing Options	Includes One Pump Head
1302-3600-955	1302-3600	07575-10	955-0000	77200-50	0.1 to 600	P/S 13, 14, 16, 17, 18, 25 (Thin Wall)	EASY-LOAD II
1302-3600-956	1302-3600	07575-10	956-0000	77200-52		P/S 15, 24, 35, 36 (Thick Wall)	High-Performance
1302-3600-965	1302-3600	07575-10	965-0000	77250-62

Tubing Options:

Flow rates in mL/min for P/S Digital Console Process Drive
RPM	Precision Pump Tubing
	P/S 13	P/S 14	P/S 16	P/S 25	P/S 17	P/S 18
Standard*, EASY-LOAD, EASY-LOAD II, EASY-LOAD 3
	Cartridge, Multichannel			Cartridge
0.1 to 600	0.006 to 36 0.002 to 13.7	0.021 to 130 0.008 to 49.4	0.08 to 480 0.030 to 182.6	0.17 to 1000 0.065 to 380.4	0.28 to 1700 0.107 to 646.7	0.38 to 2300 0.145 to 875.0
RPM	High-Performance Precision Pump Tubing*
	P/S 15		P/S 24	P/S 35		P/S 36
Multichannel† Standard*, EASY-LOAD, EASY-LOAD II, EASY-LOAD 3
	EASY-LOAD
0.1 to 600	0.17 to 1000 (0.18 to 1100) 0.065 to 38 (0.068 to 418)		0.28 to 1700 (0.30 to 1800) 0.11 to 647 (0.11 to 685)	.38 to 2300 (0.43 to 2600) 0.14 to 875 (0.16 to 989)		0.48 to 2900 (0.57 to 3400) 0.18 to 1103 (0.22 to 1293)

Note:* Values in parentheses are with high-performance pump heads †Multichannel head is not available for P/S 36.
Multichannel and Cartridge heads are available for microbore tubing.
Values in italics are gallons per day.

Specifications:

Catalog number	1302-3600-955	1302-3600-956	1302-3600-965
Includes Pump Head	EASY-LOAD II	EASY-LOAD II	High-Performance
	(thin wall)	(thick wall)	(thick wall)
Number of heads accepted	2	2	1
RPM	0.1 to 600
External control – input	0 to 20 mA, 0 to 10 V; Scalable
	START/STOP, DIR. (CW/CC), PRIME via contact closure
	Remote / Local Enable Contact
	Secondary Speed Control 0-20mA or 4-20mA
	Auxiliary Contact (Limit Switch)
External control – output	4 to 20 mA, or 0 to 10 V
Motor running logic	N.O. or N.C. (1 A @ 24 V)
Tachometer output	5 V, TTL pulse
Power supply output	24 V, 150 mA
Voltage (50/60 Hz)	Brushless continuous duty, TENV*, DC, permanent lubricated bearings
Motor type	Brushless continuous duty, TENV*, DC, permanent lubricated bearings
Control type	PWM (Pulse Width Modulated)
Speed regulation (repeatability)	±0.1%; ±0.1 rpm @ 600 rpm; %; ±0.21 rpm @ 100 rpm
Operating temperature	0 to 40ºC (32 to 104ºF)
Storage temperature	–25 to 65ºC (–13 to 149ºF)
Housing materials	Electropolished, 316 Stainless steel
IP rating	IP66 and NEMA 4X
Agency approvals	ETL, cETL, CE, ROHS
Controller dimensions (L × W × H)	13.0 × 8 × 8
Shipping weight	30 lbs.

*Totally enclosed, non-ventilating